Locker bank kiosk V3 (Qbic Luminen)end user guide
Kiosk v3 supports only a surface mount via the included wall mount adaptor bracket. The adaptor can be mounted either directly onto a locker end panel/door or onto a nearby wall via a standard gang box with either 60mm or 83mm mount points. The Smartalock installation guide assumes mounting onto a 25mm thick end panel of a locker bank which has an inside channel cut to carry the single PoE cable (and optional external card reader cable if fitted).
Luminen Kiosk installation.pdf
Kiosk v3 in standard operation using the built in card reader, only a single LAN cable for power and data is required.
Where the LAN switch provided by either Smartalock or the customer is not PoE capable, a 48V 802.3af standard PoE injector can be used to power the tablet.
<aside> 💡 Note: Luminen kiosk V3 uses 48V. If a PoE injector is required, DO NOT use the normal Smartalock 24V Passive PoE injector to power the Kiosk v3 tablet. 24V PoE will damage the tablet.
</aside>